241
Chapter 6 RECORDING Mode
Chapter 6
EXT CTRL Function
EXT CTRL Function
You use this function to control playback of an audio CD from an external CD-ROM
drive (SCSI drive). This feature lets you record samples from CD playback.
Important
To record CD playback, you must first connect the Analog Out (or Audio Out) connector
from the CD-ROM drive to the analog input(s) on the A3000’s front panel. You must also
select use of analog input by setting the Input parameter (on the RecData page; ☞227)
to AD L/R or AD L.
EXT CTRL - CD-ROM
Selects the CD-ROM drive (by its SCSI ID).
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select CD-ROM.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔ ---
Push action ✔ ----
Use this page to designate the CD-ROM drive that you want to control. You designate
the drive by selecting its SCSI ID.
Knob 1 Change Page Select P/S
• Turn the knob to switch between the function’s CD-ROM and CD-DA pages.
• Push the knob to move to the Program/Sample Selection screen. (☞95)
Knob 2 SCSI ID = 0,...,7
Turn the knob to select the SCSI ID of the CD-ROM drive that you want to record from.
The right side of the screen indicates the name (and manufacturer) of the device con-
nected to the currently selected SCSI ID. Turn the knob until you see the name (manu-
facturer) of the CD-ROM drive that you want to use.
To Next Page
Loading...
Need help?
General
