Yamaha A3000 User Manual

119
Chapter 4 PLAY Mode
Chapter 4
EASY EDIT Function
EASY EDIT - EasyEd
Adjust the sound of samples used within the program.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action - ✔✔✔✔
Push action ✔ ----
You use this feature to adjust the way the sample operates and sounds within the cur-
rently selected program.
Knob 1 Select P/S
Push the knob to move to the Program/Sample Selection screen. (☞95)
Knobs 2, 3 Edit Param = Level, Pan, ... ,MIDI Control
Turn either knob to select the parameter that you want to adjust. You can then use
Knob 4 or 5 to adjust the value. Repeat this sequence for all parameters that you need to
adjust: first select the parameter with Knob 2 or 3, and then adjust the value using Knob
4 or 5.
The available parameters are listed below. Refer to the indicated page for more informa-
tion.
Parameter Purpose Page
Level Output level 174
Pan Stereo positioning 174
Tune Coarse Coarse pitch adjustment (semitone increments) 178
Tune Fine Fine pitch adjustment (1.171875-cent increments) 178
AEG AttackRate Amplitude EG’s attack rate 188
AEG ReleaseRate Amplitude EG’s release rate 188
Filter Cutoff Filter’s cutoff frequency 182
Filter Q/Width Filter’s Q/Width setting 182
Key Limit Low Lowest key of key range* 170
Key Limit High Highest key of key range* 170
Key RangeShift Keyboard range shift
Key X-fade Key crossfade on/off 170
Vel Limit Low Minimum playback velocity† 172
Vel Limit High Maximum playback velocity† 172
Vel X-fade Velocity crossfade on/off 172

Yamaha A3000 Specifications

General

Sampling Rate	44.1kHz
MIDI	In/Out/Thru
Type	Sampler
Effects	Reverb, Chorus, Delay
Display	LCD
Storage	Floppy disk drive