206
Chapter 5 EDIT Mode
LFO Function
LFO - PtchMod (Pitch Modulation)
Sets LFO pitch modulation.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select PtchMod.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔ --
Push action ✔ ----
This page determines how the LFO waveform modulates the sample’s pitch.
Knob 1 Change Page Select P/S
• Turn the knob to change to a different page within the LFO function. Available pages
are: Common, FltrMod, PtchMod (this page), and AmpMod.
• Push the knob to move to the Program/Sample Selection screen. (☞95)
Knob 2 Depth = 0,...,127
This value sets the degree by which the pitch is modulated by the LFO waveform. Higher
values produce stronger modulation.
Knob 3 PhaseInvert = off, on
Set this value to on if you want to invert the waveform used to modulate the pitch.
If the setting is on, the A3000 modulates the pitch using the inverse of the selected LFO
waveform. (The inverse is obtained by rotating the actual LFO waveform 180 degrees
with respect to the time axis. The actual LFO waveforms are shown on page 204.)
To Next Page
Loading...
Need help?
General
