Yamaha A3000 User Manual

199
Chapter 5 EDIT Mode
Chapter 5
EG Function
Knob 3 Attack = 0,...,127
This value sets the rate at which the pitch moves from its initial level (at Note On) to the
attack level. Higher values produce faster rates.
Knob 4 Decay = 0,...,127
This value sets the rate at which the pitch moves from the attack level to the sustain
level. Higher values produce faster rates.
Knob 5 Release = 0,...,127
This value sets the rate at which the pitch moves from the sustain level to the release
level following Note Off. Higher values produce faster rates.
Note that the effectiveness of this setting declines at higher AEG release rates (☞189),
since the sound dies out before the shift in pitch can be heard.

Yamaha A3000 Specifications

General

Sampling Rate	44.1kHz
MIDI	In/Out/Thru
Type	Sampler
Effects	Reverb, Chorus, Delay
Display	LCD
Storage	Floppy disk drive