Yamaha A3000 User Manual

212
Chapter 5 EDIT Mode
MIDI/CTRL Function
Knobs 4, 5 Function = - - - - -,..., Start Address
Use this setting to select the parameter to be controlled by the controller selected by
Knob 2. Choices are listed below. For more information, refer to the indicated pages.
Function Parameter See Page...
- - - None
PitchModDepth LFO pitch modulation depth 206
AmpModDepth LFO amplitude modulation depth 207
CutoffModDepth LFO filter modulation depth 205
Cutoff Bias Filter’s cutoff frequency 182
FilterQ/Width Filter’s Q/Width 182
Pan Bias Pan* 174
Pitch Bias Pitch
Level Output level† 174
LFO Speed LFO speed 203
LFO Delay LFO delay 203
AEG Attack AEG attack rate 188
AEG Release AEG release rate 188
PEG Attack PEG attack rate 198
PEG Release PEG release rate 198
FEG Attack FEG attack rate 192
FEG Release FEG release rate 192
PitchBend Pitch-bend
Start Address Wave play start address 164
* Pan can also be controlled by Controller 010.
† Level can also be controlled by Controller 007.

Yamaha A3000 Specifications

General

Sampling Rate	44.1kHz
MIDI	In/Out/Thru
Type	Sampler
Effects	Reverb, Chorus, Delay
Display	LCD
Storage	Floppy disk drive