YAMAZAKI MAZAK VORTEX i Series User Manual

NC COMMAND 3
3-7
 G-codes of group 00 are those which are not modal, and they are valid only for blocks in
which they are entered.
 If G-codes belong to different groups each other, any G-code can be commanded in the
same block. The G-codes are then processed in order of increasing group number. If two
or more G-codes belonging to the same group are given in the same block, the G-code
entered last is valid.
Serial No. 294060
Copyright (c) 2013 YAMAZAKI MAZAK CORPORATION. All rights reserved.
Serial No. 294060

YAMAZAKI MAZAK VORTEX i Series Specifications

General

Brand	YAMAZAKI MAZAK
Model	VORTEX i Series
Category	Computer Hardware
Language	English