Zebra ZT600 Series User Manual

Printer Setup and Operation
11
Service the Printer
If you have a problem using the printer, contact your facility's technical or systems support. If there is a
problem with the printer, they will contact the Zebra Global Customer Support Center at:
http://www.zebra.com/support.
When contacting Zebra Global Customer Support, have the following information available:
• Serial number of the unit
• Model number or product name
• Firmware version number
Zebra responds to calls by e-mail, telephone, or fax within the time limits set forth in service agreements. If
your problem cannot be solved by Zebra Global Customer Support, you may need to return your
equipment for servicing and will be given specific directions.
If you purchased your product from a Zebra business partner, please contact that business partner for
support.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C