Zebra ZT600 Series - RFID ANTENNA

Printer Configuration and Adjustment
154
RFID > RFID ANTENNA
If the desired antenna is not achieved through RFID tag calibration, a value may be specified.
Accepted values:
A1, A2, A3, A4
B1, B2, B3, B4
C1, C2, C3, C4
D1, D2, D3, D4
E1, E2, E3, E4
Related ZPL command(s):
^RW
SGD command used: rfid.reader_1.antenna_port
Printer web page: View and Modify Printer Settings > RFID Setup > RFID ANTENNA
RFID
—
RFID STATUS
—
RFID CALIBRATE
—
READ RFID DATA
—
RFID TEST
—
RFID PROGRAM POS.
—
RFID ANTENNA
—
RFID READ POWER
—
RFID WRITE POWER
—
RFID VALID COUNT
—
RFID VOID COUNT