Zebra ZT600 Series User Manual

Diagnostics and Troubleshooting
219
Print Test Format Option
The option PRINT TEST FORMAT onpage129 can be used to print various labels that can assist you with
troubleshooting or with making adjustments to your printer. This section describes the selections for this
option.
DARKNESS
The printer repeats printing an image with incrementing darkness levels. Press CANCEL to stop the
printing process at any time when the pattern is clear and legible.
Use the numbers on the images to determine the best print darkness. If necessary, change your darkness
setting to the one that gave you the best results on the above labels. (See DARKNESS onpage94.)

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C