Zebra ZT600 Series User Manual

Using the USB Host Ports and the NFC Capabilities
250
USB Host
The USB host ports allow you to connect USB devices—such as a keyboard, scanner, or USB Flash
drive—to the printer. The exercises in this section will teach you how to perform USB mirror, how to
transfer files to and from the printer, and how to provide information for which you are prompted and then
print a label using that information.
Figure 22 • USB Host Port Location
Important • When using a USB host port, files should be named only with 1 to 16 alphanumeric characters
(A, a, B, b, C, c, ..., 0, 1, 2, 3, ...). Do not use Asian characters, Cyrillic characters, or accented characters
in file names.
Note • Some functions may not work properly if there are underscores in a file name. Use periods instead.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C