Zebra ZT600 Series User Manual

Printer Configuration and Adjustment
164
LANGUAGE > ZPL MODE
Select the mode that matches what is used in your label formats. This printer accepts label formats written
in either ZPL or ZPL II, eliminating the need to rewrite any ZPL formats that already exist. The printer
remains in the selected mode until it is changed in one of the ways listed here.
Accepted values:
• ZPL II
• ZPL
Related ZPL command(s): ^SZ
SGD command used: zpl.zpl_mode
Printer web page: View and Modify Printer Settings > ZPL Control
LANGUAGE
—
LANGUAGE
—
COMMAND LANGUAGE
—
COMMAND CHAR
—
CONTROL CHAR
—
DELIMITER CHAR
—
ZPL MODE
—
VIRTUAL DEVICE

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C