Zebra ZT600 Series - HOST HANDSHAKE

Printer Configuration and Adjustment
173
PORTS > HOST HANDSHAKE
Select the handshake protocol that matches the one being used by the host computer.
Accepted values:
• XON/XOFF
• RTS/CTS
• DSR/DTR
Related ZPL command(s):
^SC
SGD command used:
comm.handshake
Printer web page: View and Modify Printer Settings > Serial Communications Setup
PORTS
—
BAUD RATE
—
DATA BITS
—
PARITY
—
HOST HANDSHAKE
—
WML