Zebra ZT600 Series User Manual

Printer Configuration and Adjustment
92
Adjust Printer Settings
This section presents the printer settings that you can change and identifies the tools for changing them.
These tools include the following:
• The printer’s user menus
See the information that follows in this section.
• ZPL and Set/Get/Do (SGD) commands
See the
Zebra
®
Programming Guide for more information.
• The printer’s web pages when the printer has an active wired or wireless print server connection
See the
ZebraNet Wired and Wireless Print Servers User Guide for more information.
Copies of the referenced manuals are available at http://www.zebra.com/manuals.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C