Zebra ZT600 Series - RFID READ POWER

Printer Configuration and Adjustment
155
RFID > RFID READ POWER
If the desired read power is not achieved through RFID tag calibration, a value may be specified.
Accepted values:
0 to 30
Related ZPL command(s):
^RW
SGD command used:
rfid.reader_1.power.read
Printer web page: View and Modify Printer Settings > RFID Setup > RFID READ PWR
RFID
—
RFID STATUS
—
RFID CALIBRATE
—
READ RFID DATA
—
RFID TEST
—
RFID PROGRAM POS.
—
RFID ANTENNA
—
RFID READ POWER
—
RFID WRITE POWER
—
RFID VALID COUNT
—
RFID VOID COUNT