Zebra ZT600 Series User Manual

Printer Configuration and Adjustment
96
SETTINGS > MEDIA TYPE
Select the type of media that you are using.
Accepted values:
• CONTINUOUS
• GAP/NOTCH
• MARK
If you select CONTINUOUS, you must include a label length in your label
format (^LL if you are using ZPL). If you select GAP/NOTCH or MARK for
various noncontinuous media, the printer feeds media to calculate the
label length.
See Types of Media on page 22 for more information.
Related ZPL command(s):
^MN
SGD command used:
ezpl.media_type
Printer web page: View and Modify Printer Settings > Media Setup > Media Type
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
COVER OPEN LIGHT
—
MEDIA PATH LIGHTS
—
RIBBON PATH LIGHTS
—
LANGUAGE

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C