Specifications
264
Standard Connections
Bluetooth
®
Version 4.0
Limitations and Requirements Many mobile devices can communicate with the printer within a 30-foot
radius of the printer.
Connections and Configuration Refer to the
Zebra Bluetooth User Guide
for specific instructions for
configuring your printer to use a Bluetooth interface. A copy of this manual is available at
http://www.zebra.com/manuals.
Two USB Host Ports
Limitations and Requirements You can only plug one device into each of the printer’s two USB host
ports. You cannot use a third device by plugging it into a USB port on one of the devices, nor can you use
an adapter to split a USB host port on the printer to accept more than one device at a time.
Connections and Configuration No additional configuration is necessary.
Zebra PrintTouch/Near Field Communication (NFC)
Limitations and Requirements NFC communication must be initiated by touching your device to the
appropriate location on the printer.
Connections and Configuration Some devices may not support NFC communication with the printer
until you alter their settings.
USB 2.0 Data Interface
Limitations and Requirements Maximum cable length of 16.4 ft (5 m).
Connections and Configuration No additional configuration is necessary.
Wired Gigabit Internal Ethernet Print Server
Limitations and Requirements
• The printer must be configured to use your LAN.
• A second wired print server can be installed in the bottom option slot.
Connections and Configuration Refer to the
ZebraNet Wired and Wireless Print Servers User Guide
for configuration instructions. A copy of this manual is available at http://www.zebra.com/manuals.
To Next Page
Loading...