Need help?Do you have a question about the Zebra ZT600 Series and is the answer not in the manual?
General| Print Method | Thermal Transfer/Direct Thermal |
|---|---|
| Print Resolution | 203 dpi/8 dots per mm; 300 dpi/12 dots per mm |
| Maximum Print Width | 4.09 in./104 mm |
| Maximum Print Speed | 14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi |
| Media Sensors | Reflective and Transmissive |
| Communication | USB, Serial, Ethernet, Bluetooth |
| Memory | 512 MB Flash |
| Operating Temperature | 5°C to 40°C |
Procedures for unpacking, inspecting, storing, servicing, and shipping the printer.
Guidance on selecting an appropriate and safe location for the printer.
Identification and overview of the main parts of the printer.
Choosing the appropriate print mode based on media and printer options.
Step-by-step instructions for loading roll or fanfold media into the printer.
Instructions for operating the printer in Tear-Off mode.
Instructions for loading media for Peel-Off or Applicator modes.
Instructions for loading media for Rewind mode.
Instructions for loading media for Cutter or Delayed Cut modes.
Explains when ribbon is required and how to determine it using tests.
Detailed instructions for loading thermal transfer ribbon into the printer.
Steps to download and install Zebra Setup Utilities and printer drivers.
Guide for connecting the printer to a computer using a USB port.
Guide for connecting the printer using Serial or Parallel ports.
Steps to connect the printer to a wired network using its Ethernet port.
Instructions for configuring the printer for a wireless network connection.
Overview of the control panel layout, buttons, and display navigation.
Modifying parameters like darkness, speed, media type, language, and network settings.
Utilizing tools for print information, diagnostics, file management, and setup.
Configuring network parameters and RFID subsystem settings.
Adjusting media sensor types, sensitivity, and serial port communication parameters.
Configuring Bluetooth settings and performing printer sensor calibration.
Adjusting printhead pressure, toggle positions, and media sensor alignment.
Installing the rewind/liner take-up plate for different operational modes.
Recommended cleaning intervals and procedures for printer components.
Detailed steps for cleaning the printhead, platen roller, and media path.
Safely removing used ribbon from the take-up spindle.
Performing built-in tests to check printer condition and components.
Solutions for common printing problems, barcode quality, and registration issues.
Resolving problems with ribbon detection, RFID functionality, and printer communication.
Addressing calibration failures and printer freezing during operation or boot-up.
Practical exercises on file transfer, printing, and keyboard input using USB host ports.
Pairing smart devices via NFC and using them for data entry and printing.
Details on physical dimensions, weight, temperature, power, and interface types.
Technical specifications for printing resolution, media compatibility, and ribbon requirements.
Alphabetical list of technical terms and their definitions used in the manual.
To Next Page
