Printer Setup and Operation
60
Connect a Computer to the Printer’s USB Port
Complete the steps in this section only after you have installed the Zebra Setup Utilities program. If
necessary, complete the steps in Install Zebra Setup Utilities onpage51 before continuing.
Running the System Prepare Wizard
If you are at the Zebra Setup Utilities screen, you do not need to complete this section. Continue with
Connecting the printer to a USB port on your computer on page 61.
The first time that you install the Zebra Setup Utilities program and printer drivers, you are prompted to
follow the System Prepare Wizard.
Figure 4 • System Prepare Wizard
1. Click Next.
The System Prepare Wizard prompts you to connect the printer to the USB port on your computer.
Important • You must install the Zebra Setup Utilities program before connecting the printer to your
computer. Your computer will not install the correct printer drivers if you connect the printer to it without
the Zebra Setup Utilities program.
Caution • Ensure that the printer power is off (O) before connecting data communications cables.
Connecting a data communications cable while the power is on (I) may damage the printer.
To Next Page
Loading...
Need help?
General