Zebra ZT600 Series User Manual

Using the USB Host Ports and the NFC Capabilities
257
Near Field Communication (NFC)
The Zebra Print Touch™ feature allows you to touch an Android™-based, NFC-enabled device (such as a
smart phone or tablet) to the printer’s NFC logo (Figure 23) to pair the device to the printer. This capability
allows you to use your device to provide information for which you are prompted and then print a label
using that information.
Figure 23 • NFC Logo Location
Important • Some devices may not support NFC communication with the printer until you alter their
settings. If you encounter difficulties, consult your service provider or your smart device manufacturer for
more information.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C