Zebra ZT600 Series User Manual

Printer Configuration and Adjustment
93
User Menus The following are the printer’s user menus and the menu items that appear in each. Click
any menu item to go to its description. For navigation instructions, see Navigating through Screens in the
Standard Display on page 89.
NETWORK
— ACTIVE PRINT SERVER
— PRIMARY NETWORK
— WIRED IP ADDRESS
— WIRED SUBNET MASK
— WIRED GATEWAY
— WIRED IP PROTOCOL
— WIRED MAC ADDRESS
— WLAN IP ADDRESS
— WLAN SUBNET MASK
— WLAN GATEWAY
— WLAN IP PROTOCOL
— WLAN MAC ADDRESS
— ESSID
— CHANNEL
— SIGNAL
— IP PORT
— IP ALTERNATE PORT
— PRINT INFORMATION**
— RESET NETWORK
— VISIBILITY AGENT
— LOAD DEFAULTS
— RFID MENU*
RFID
— RFID STATUS
— RFID CALIBRATE
— READ RFID DATA
— RFID TEST
— RFID PROGRAM POS.
— RFID ANTENNA
— RFID READ POWER
— RFID WRITE POWER
— RFID VALID COUNT
— RFID VOID COUNT
— LANGUAGE MENU*
TOOLS
— PRINT INFORMATION**
— IDLE DISPLAY
— POWER UP ACTION
— HEAD CLOSE ACTION
— LOAD DEFAULTS
— MEDIA/RIBBON CAL**
— DIAGNOSTIC MODE
— ENERGY STAR
— CONFIG INFO TO USB
— ZBI ENABLED?
— RUN ZBI PROGRAM
— STOP ZBI PROGRAM
— PRINT USB FILE
— COPY USB FILE TO E:
— STORE E: FILE TO USB
— PRINT STATION
— PASSWORD PROTECT
— APPLCTR ERR: PAUSE
— PRINT TEST FORMAT
— NETWORK MENU*
SETTINGS
— DARKNESS
— PRINT SPEED
— MEDIA TYPE
— PRINT METHOD
— TEAR OFF
— PRINT WIDTH
— PRINT MODE
— LABEL TOP
— LEFT POSITION
— REPRINT MODE
— LABEL LENGTH MAX
— COVER OPEN LIGHT
— MEDIA PATH LIGHTS
— RIBBON PATH LIGHTS
— LANGUAGE**
— TOOLS MENU*
* Denotes a shortcut to the next user menu.
** Appears in multiple user menus for your convenience.
PORTS
— BAUD RATE
— DATA BITS
— PARITY
— HOST HANDSHAKE
— WML
— BLUETOOTH MENU*
BLUETOOTH
— BLUETOOTH ADDRESS
— MODE
— DISCOVERY
— CONNECTED
— BT SPEC VERSION
— MIN SECURITY MODE
— SETTINGS MENU*
SENSORS
— SENSOR TYPE
— MEDIA/RIBBON CAL**
— PRINT INFORMATION**
— SELF ADJUST SENSOR
— LABEL SENSOR
— TAKE LABEL
— PORTS MENU*
LANGUAGE
— LANGUAGE**
— COMMAND LANGUAGE
— COMMAND CHAR
— CONTROL CHAR
— DELIMITER CHAR
— ZPL MODE
— VIRTUAL DEVICE
— SENSORS MENU*
* Denotes a shortcut to the next user menu.
** Appears in multiple user menus for your convenience.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C