Zebra ZT600 Series User Manual

Printer Configuration and Adjustment
191
6. Hold the lower nut in place and tighten the upper knurled nut.
7. If necessary, reinitiate the PRINT LINE option of PRINT TEST FORMAT onpage129.
8. While printing labels, use the control panel to raise the darkness setting until the labels are again
printing black instead of gray. (See DARKNESS onpage94.)
9. Check the print quality, and if necessary, repeat this procedure until the printhead pressure is
adequate.
Increase pressure Decrease pressure

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C