Zebra ZT600 Series User Manual

Printer Configuration and Adjustment
194
2. Align the large hole of the keyhole in the rewind/peel plate over the knurled nut, and then slide the
plate down until it hits the studs.
3. Tighten the knurled nut.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C