Zebra ZT600 Series User Manual

Printer Setup and Operation
86
5. Did the printer configuration label print, and is the print quality acceptable?
If... Then...
The label printed and the print
quality is acceptable
Your printer is ready for printing. Continue with the label
designer program of your choice. You may use
ZebraDesigner ™ , which you can download from
http://www.zebra.com.
The label did not print
a. Close the Tools window and make sure that you selected
the correct printer driver before you click Open Printer
Tools. Try printing the label again.
b. If the label still did not print, check the connections between
your printer and your computer or your printer and your
network.
c. If necessary, modify the printer’s settings to make them
match your computer’s settings.
The label prints, but with poor
quality or other issues
See Diagnostics and Troubleshooting on page 215.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C