Ascotel IntelliGate 2025/2045/2065
Part 2 Routing elements 241
The duration of the delay time and forwarding time can be set globally to 3, 5 or
7 ringing cycles.
Other delay times can also be specified on a subscriber terminal, e.g. the delayed
signalling on a line key of a key telephone or on a team key.
Fig. 2.47: Call distribution in a user group
Rules Applying to the Subscriber Group
Any member of a subscriber group can use the menu selection or a */# procedure
to log out of (#48xx) or log into(*48xx) a user group (see also "User group: Log-
ging in and logging out", page 533. Members who have logged out of a group
are ignored during call distribution. The last remaining member in a group does
not have the possibility of logging out of the group.
A subscriber may belong to several user groups at the same time. Logging out of
or in to user groups applies simultaneously to all the user groups or specifically for
one particular user group.
Cordless group
Forwarding time for linear and
cyclic call distribution
Call distribution
element
Call delay to
the UG elements
Forwarding time to
the subgroup
SC
GC
OC
haz0111aaenc0
200
To Next Page
Loading...
