Aastra Ascotel IntelliGate 2065 - Page 240

Ascotel IntelliGate 2025/2045/2065
240 Routing elements Part 2
Fig. 2.46: Cyclic call distribution
Delayed Calls to Subgroups
The members of the subscriber group element can also be subdivided into a main
group and a subgroup (setting "UG subgroup as of member").
The subgroup is called according to the set call distribution:
• If call distribution is set on "global", the subgroup rings once the configured
delay time has elapsed.
• If call distribution is set on "linear or cyclic", the subgroup rings once the con-
figured forwarding time has elapsed after the call has been ringing at the last
member of the main group.
The members of the subgroup are always called according to the "global" call dis-
tribution.
In Summary
In a user group there are two selectable times that can be used for controlling call
distribution. Both are preconfigured in the system configuration:
• The delay time affects
– The user group elements. It can be activated and deactivated for each ele-
ment.
– The subgroup of members of the subscriber group set on global.
• The forwarding time for linear and cyclic call distribution among the members
of the subscriber group.
B1
1
st
call 2
nd
call 3
rd
call
B2
B3
haz0109aaenb0
A
User group
B16
B1
B2
B3
A
User group
B16
B1
B2
B3
A
User group
B16