Ascotel IntelliGate 2025/2045/2065
Part 2 Data services 355
Tab. 2.75: Routing parameter settings
Routing to a data-service individual destination
If in the data-service destination table "DD individual destination" is entered as
the destination for a data service type, the call is routed to the destination entered
under "DD individual destination" in the call distribution element.
Fig. 2.105: Incoming data-service routing from the public network with direct dialling to a data-
service individual destination
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Public
• Protocol DSS1
• Direct dialling plan 1
• Call Distribution Element 1 (relevant only if there is no suitable DD number)
Direct dialling plan 1:
• DD number 20 2 (reference number of a call distribution element)
Call distribution element 2:
• Data-service destination table 2 (reference number of the data-service destination table)
Data-service destination table 2:
• Data-service type "Fax 4" 220 (phone number of the data-service destination, Fax 4 in the
example)
Trunk 1 (DSS1)
-> Direct dialling
plan 1
222 22 10
222 22 20
1.
1.
2.
2.
3.
3.
T
T2
Exchange
220
PC
210
PC
PC
PC
DD No. 10
-> Call distribution 1
DD No. 20
-> Call distribution 2
Direct dialling plan 1
Call distribution 1
Call distribution 2
-> DD destination
table 2
-> DD individual
destination SC 220
DD dest. table 2
Transparent B channel
-> DD individual
destination
-> DD individual
destination SC 210
-> DD destination
table 2
haz0750aaenb0
To Next Page
Loading...
