Ascotel IntelliGate 2025/2045/2065
356 Data services Part 2
Tab. 2.76: Routing parameter settings
The call is also routed to this destination if no data-service destination table is allo-
cated in the call distribution element:
Fig. 2.106: Incoming data-service routing from the public network with direct dialling to a data-
service individual destination but without entry in a data-service destination table
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Public
• Protocol DSS1
• Direct dialling plan 1
Direct dialling plan 1:
• DD number 10 1 (reference number of a call distribution element)
• DD number 20 2 (reference number of a call distribution element)
Call distribution element 1:
• Data-service destination table 2 (reference number of the data-service destination table)
• Data-service individual destination 210 (phone number of the data-service individual destination,
in this instance PC 210 )
Call distribution element 2:
• Data-service destination table 2 (reference number of the data-service destination table)
• Data-service individual destination 220 (phone number of the data-service individual destination,
in this instance PC 220 )
Data-service destination table 2:
• Data service type "B channel
transparent"
Data-service individual destination (of the call distribution
elements)
Trunk 1 (DSS1)
-> Direct dialling
plan 1
222 22 10
222 22 20
T
T2
Exchange
220
PC
210
PC
PC
PC
DD No. 10
-> Call distribution 1
DD No. 20
-> Call distribution 2
Direct dialling plan 1
Call distribution 1
Call distribution 2
-> DD destination
table -
-> DD individual
destination SC 220
-> DD destination
table -
-> DD individual
destination SC 210
haz0750aaena0
To Next Page
Loading...
