Ascotel IntelliGate 2025/2045/2065
386 Call logging (CL) Part 2
with a Tab and ends with a Carriage Return and Line Feed. These control charac-
ters are output with hexadecimal values as per Tab. 2.84.
Tab. 2.84: Control characters for separating data fields and data record
A data field contains the following information:
• Data field name
• Data format
• Data field formatting
• The data field length
A data field can be identified by its position in the data record (Tab. 2.87).
Data field name
In PC5 format the data field name is not output.
Data format
A data field consists of a certain number of characters and a specific data format.
Tab. 2.85 shows the symbols used for describing the data fields in Tab. 2.87.
Tab. 2.85: Symbols used to describe the data format
Designation Meaning Hexadecimal value Usage
HT Horizontal tab 09 Start of data record
CR Carriage Return 0D Together at the end of a data record (CR plus LF)
LF Line Feed 0A
Symbol Meaning Number of characters
i Integers see "Length" in Tab. 2.87
d Decimal figures see "Length" in Tab. 2.87
yymmdd yy = year, mm = month, dd = day 3 x 2 characters
hh:mm hh = hours, mm = minutes 2 x 2 characters
hhHmmMss hh = hours, mm = minutes, ss = seconds, H = "H", M = "M" 3 x 2 characters
cbbpp c = primary channel group, bb = trunk card number, pp = net-
work interface number
1+2+2 characters
To Next Page
Loading...
