Ascotel IntelliGate 2025/2045/2065
Part 2 Call logging (CL) 417
Example of PC1 format
The charge data is printed out every time the handset goes on-hook. This also
applies in cases where an external connection is forwarded.
Fig. 2.153: CL output with PC1
PC2 format
This format is an extension of the PC1 format. Here the cost centre number is also
output as a separate field, along with the DDI number.
Format structure
Tab. 2.117: PC2 format
Data field, meaning Structure Format Length Offset
Start of data record HT 1 0
Subscriber number ttttt |- SP 5 1
Cost centre number kkkkkkkkk |- SP 9 7
Sort character oo 00 -| 2 17
Date of start of connection yymmdd 00 -| 6 20
Time of start of connection hh:mm 00 -| 5 27
22 10 970504 07:22 00H00M13 00009 00003 167 0087
21 98 970504 07:22 00H00M04 00101 00000 01211111 0088
Internal subscriber number
Number of metering pulses
Date in PC mode
(YYMMDD)
Call duration Number dialled
Time
Sort character
Network connection
Serial number
haz0159aaenc0
OFF
PC1
PC2
PC3
PC4
PC5
Protocol
Receipt
CL output
❏
❏
❏
❏
❏
❏
❏
❏
X
To Next Page
Loading...
