Ascotel IntelliGate 2025/2045/2065
418 Call logging (CL) Part 2
Example of PC2 format
Fig. 2.154: CL output with PC2
Duration of connection hhHmmMss 00 -| 8 33
Primary channel group / trunk card number / net-
work interface number
1)
cbbpp 00 -| 5 42
Direct dial number
2)
ddddddddddd |- SP 11 48
Number of metering pulses iiiii 00 -| 5 60
Call number dialled
3)
zzzzzzzzzzzzzzzzzzzz |- SP 20 66
Serial number llll 00 -| 4 87
Carriage Return CR 1 91
Line Feed LF 1 92
1)
The primary channel group is output in position "c", the trunk card number in position "bb" and the
network interface number in position "pp" (see example on page 418).
2)
This is the direct dial number that is displayed as the CLIP to an external call partner.
3)
If "Data protection" is configured, the last 4 digits of the number are replaced by the space character
"SP".
Data field, meaning Structure Format Length Offset
31342 21168 10 970416 15:20 00H03M45 01002 34 00019 004988223211 0678
33031 90 970417 08:18 00H04M20 00201 00010 065243024 0679
Internal subscriber number
Number of metering pulses
Date in PC mode
(YYMMDD)
Call duration
Number dialled
Cost centre number
Network connection
Sort character Time Serial numberDDI No.
haz0160aaenb0
OFF
PC1
PC2
PC3
PC4
PC5
Protocol
Receipt
CL output
❏
❏
❏
❏
❏
❏
❏
❏
X
To Next Page
Loading...
