Ascotel IntelliGate 2025/2045/2065
Part 2 Features 527
• In the Configuration Manager
In the Courtesy settings click the "Activate courtesy files" button.
• With the procedure *930
The start of the transfer is confirmed by a check tone.
After activation we recommend that you check the texts by monitoring them
using the corresponding */# procedure (see Tab. 2.264). However this can only
be done once the texts have been fully loaded, which takes a little more time than
the sum total of the length of all the texts to be activated.
Wave files that are longer than the time available for the recorded messages (see
page 524) are cut off.
Wave files with incorrect file names cannot be loaded. AIMS generates a corre-
sponding error message.
Wave files with incorrect format cannot be activated. In such cases the texts
already activated are simply retained. No error message is generated.
Prefix Dialling Procedures
Authorised subscribers can activate or deactivate the Courtesy feature for each
group.
Tab. 2.265: Courtesy Service: Procedures
System configuration
Tab. 2.266: Courtesy Service: System configuration
Courtesy group */# procedure
Activate • *931 (Group 1)
• *932 (Group 2)
Deactivate • #931 (Group 1)
• #932 (Group 2)
Parameter Parameter value Remarks
Courtesy group Group <1 and 2> only basic system 2065 has
2 groups
Courtesy delay Delay <0 to 300 seconds>
To Next Page
Loading...
