Abbott i-STAT Alinity - Page 201

Scan Entry Check Digit
Method
Whether to use a check digit when scanning a value to create an operator or
paent ID.
No check digit on scan entry Do not use a check digit when creang
operator or paent IDs.
Mod 11 check digit on scan
entry
Use the Mod 11 algorithm when creang
operator or paent IDs.
Mod 10 check digit on scan
entry
Use the Mod 10 algorithm when creang
operator or paent IDs.
Barcode Type Select all that apply.
Paent First Name Operator enters the paent’s rst name for conrmaon when a crical callback
is read to the caregiver. If Posive Paent Idencaon (PPID) is enabled, this
informaon is automacally populated.
Note: For Paent First Name opons see the secon for Paent Last
Name Opons. Opons are the same for both.
Caregiver ID Operator enters the caregiver’s last name or ID for conrmaon when a
crical callback is read to the caregiver.
Format Note: Caregiver ID opons for Format, Entry Type, Minimum
Length, Maximum Length, Scan Mask, Manual Check Digit
Method, Scan Entry Check Digit Method and Barcode Type are
the same as those for Paent Last Name. See the informaon
shown earlier in this secon.
Entry Type
Minimum Length
Maximum Length
Scan Mask
Manual Check Digit
Method
Scan Entry Check Digit
Method
Barcode Type
161
i-STAT Alinity — System Operaons Manual Art: 746300-01 Rev. N Rev. Date: 02-Nov-2022