Abbott i-STAT Alinity - Page 235

Cal Ver Test Sengs
Calibraon Vericaon (Cal Ver) test sengs can assist the operator and support compliance with
regulatory agencies.
Cal Ver Test Sengs
Pass/Fail Determinaon Describes the method used to determine the acceptability of Cal
Ver results. Select one of these opons:
None Cal Ver Pass/Fail determinaon is not applied.
Auto via eVAS Automacally determine if the results of a Cal
Ver test passed or failed, based on Cal Ver
ranges from an electronic Value Assignment
Sheet (eVAS or ReVAS) le downloaded to the
instrument. It is recommended that the
instruments are wirelessly connected to the
CWi for automac eVAS updates. If the
instruments are not connected to CWi, the
eVAS must be loaded onto each instrument
using the USB port on the Base Staon.
Manual The operator manually compares the Cal Ver
results to a Value Assignment Sheet
downloaded or printed from the Abbo Point
of Care website at: hps://
www.globalpointofcare.abbo/en/support/
istat-brand/vas-i-stat-alinity.html and indicates
on the instrument whether the Cal Ver test
passed or failed.
Results Display Format Determines whether the Cal Ver results displayed on the instrument
are either:
Numeric Cal Ver results are displayed in numeric format.
Suppressed The following symbol <> is displayed next to
each Cal Ver test name in place of the
quantave (numeric) results. Do not select
this opon if manual pass/fail determinaon is
selected.
Fluid Sengs
Only Allow APOC uids Unselect the check box if non-APOC Cal Ver uids will be used.
Cartridge Help
Display Insert Cartridge Help Graphics displayed on the instrument screen aer all required elds
are complete but before the cartridge is inserted. The cartridge help
screens include the 'collect and mix sample' and 'll cartridge'
graphics.
195
i-STAT Alinity — System Operaons Manual Art: 746300-01 Rev. N Rev. Date: 02-Nov-2022