Abbott i-STAT Alinity User Manual

Manual Check Digit
Method
If a facility uses a supported check digit algorithm when creang operator or
paent IDs, the i‑STAT Alinity can verify the entered ID format by calculang
the check digit and comparing it to the entered ID number. If the check digits
do not match, the ID is rejected.
Note: The i‑STAT Alinity System supports the Mod 10 and Mod 11
check digit algorithms described in the HL7 Table 0061 (Check Digit
Scheme) in the HL7 Specicaon (Rev 1.4). Contact your LIS/HIS or IT
departments to determine if your facility uses check digits in the
creaon of operator and/or paent ID numbers, and if so, which
algorithm is used.
Allowable values are:
No check digit on manual
entry
Do not use a check digit when creang
operator or paent IDs.
Mod 11 check digit on manual
entry
Use the Mod 11 algorithm when creang
operator or paent IDs.
Mod 10 check digit on manual
entry
Use the Mod 10 algorithm when creang
operator or paent IDs.
Scan Entry Check Digit
Method
Whether to use a check digit when scanning a value to create an operator or
paent ID.
No check digit on scan entry Do not use a check digit when creang
operator or paent IDs.
Mod 11 check digit on scan
entry
Use the Mod 11 algorithm when creang
operator or paent IDs.
Mod 10 check digit on scan
entry
Use the Mod 10 algorithm when creang
operator or paent IDs.
Barcode Type Select all that apply.
When the specicaons for this item are complete, choose from the opons in the lower right corner of
the screen:
• Click Publish to complete the item so it will appear on the Manage Items list
• Click Discard to delete the item
233
i-STAT Alinity — System Operaons Manual Art: 746300-01 Rev. N Rev. Date: 02-Nov-2022

Abbott i-STAT Alinity Specifications

General

Brand	Abbott
Model	i-STAT Alinity
Category	Medical Equipment
Language	English