Abov MC97F60128 User Manual

2
MC97F60128
ABOV Semiconductor Co., Ltd.
Revision history
Version
Date
Revision list
0.0
2013.12.24
Published this book.
0.6
?
0.7
2014.09.02
Added Note at LCD Block Diagram.
0.8
2014.09.19
Modify contents of Buzzer
Added Note about the timer clock
Modify contents of T7/8 PWM
0.9
2014.09.22
Modify contents of Buzzer
Modify contents of Flash
0.10
2014.10.07
Added MC97F66128AL14 64-LQFP Package.
Added Contents of Flash, “Protection for Invalid Erase/Write”
0.11
2014.11.10
Changed Spec. Max. Value of IDD3/IDD4/IDD5.
IDD3 : 120uA  125uA, IDD4 : 10uA  15uA, IDD5 : 3uA  8uA
0.12
2015.01.28
1. Change Xtal Max Frequency : 16MHz  12MHz
Change IRC Max Frequency : 16MHz  8MHz
Change PLL Max Frequency : 16MHz  8MHz
2. Change IDD1/2 Spec
IDD1: 7.0/12.0mA (Typ/Max :@16MHz/5.5V/Xtal)
 5.0/10.0mA (Typ/Max :@12MHz/5.5V/Xtal)
4.5/9.0mA (Typ/Max :@12MHz/3.3V/Xtal)
 3.0/6.0mA (Typ/Max :@8MHz/3.3V/Xtal)
6.0/10.0mA (Typ/Max :@16MHz/5.5V/IRC)
 3.5/7.0mA (Typ/Max :@8MHz/5.5V/IRC)
IDD2: 2.5/4.0mA (Typ/Max :@16MHz/5.5V/Xtal)
2.0/4.0mA (Typ/Max :@12MHz/5.5V/Xtal)
1.5/3.0mA (Typ/Max :@12MHz/3.3V/Xtal)
1.5/3.0mA (Typ/Max :@8MHz/3.3V/Xtal)
2.0/4.0mA (Typ/Max :@16MHz/5.5V/IRC)
1.2/2.4mA (Typ/Max :@8MHz/5.5V/IRC)
3. Change POR Max Slope : 30V/ms  5V/ms
1.0
2015.04.14
Change R
LCD
Spec in LCD Voltage Characteristics.
1.1
2015.06.26
Fix the typo.
Change a Device Name “MC97F66128L14” to “MC97F67128LB14”
Change a Device Name “MC97F66128AL14” to “MC97F66128LB14”
1.2
2015.10.15
Remove invalid contents about LCD bias.
Modify invalid contents about TIFLAG register
1.3
2015.12.22
Change symbol name from ILE, DLE, FSE, t
CON
, V
AN
, I
AN
to INL, DNL, TOE, t
CONV
, V
AIN
,
I
AIN
in 7.3 A/D Converter Characteristics
1.4
2016.04.04
Change tR spec max value form 5.0V/ms to 30.0V/ms in 7.5 Power-On Reset
Characteristics
Add Flash Data Retention Time in Chapter 7.17 Internal Flash Rom Characteristics
Add a chapter 7.25 Recommended Circuit and Layout with SMPS Power.
Modify the program tips in Chapter 15. Flash Memory.
Add an appendix about “Flash Protection for invalid Erase/Write”
1.5
2016.12.23
Update OCD dongle image and writing tool images.
1.6
2017.02.01
Added the note on the flash memory erase and write in Chapter 15. Flash Memory.
Fixed typos of USI Status Register in Chapter 11.13 USI0/USI1 (USART + SPI + I2C).
1.7
2017.08.02
Updated Package diagram(80 LQFP-1414) in Chapter 4. Package Diagram.
1.8
2017.12.12
Revised this book.
Added Figure 1.1 Device Nomenclature
Updated Chapter 1.3.2 OCD2(On-chip debugger) emulator and debugger.
Updated Figure 1.3 E-PGM+(Single writer).
Added Chapter 1.4 MTP programming.
Updated Package diagram(100-pin LQFP-1414, 80-pin LQFP-1212, 64-pin LQFP-1414)
in Chapter 4. Package Diagram.
Updated Chapter 7.25 Recommended Circuit and Layout with SMPS Power.

Abov MC97F60128 Specifications

General

Brand	Abov
Model	MC97F60128
Category	Microcontrollers
Language	English