216
ABOV Semiconductor Co., Ltd.
PWMCRH (PWM Generator Control High Register) : 40A9H (XSFR)
Initial value : 00H
Select the external EXTSPn pin function with falling edge trigger
Disable the EXTSPn pin function
Enable shot stop. The PWMOUT pin is held for the current PWM
cycle and restarts with PWMBDR by the external EXTSPn pin
falling edge trigger. If a shot stop occurs, the PWMOUT pin is held
for the current PWM cycle to low level when PWMPOL bit is ‘0’ and
high level when PWMPOL bit is ‘1’.
Enable emergency stop. The PWMOUT pin can be stopped by the
external EXTSPn pin falling edge trigger or software control with
PWMEN bit. If an emergency stop occurs, the PWMEN bit is
immediately cleared to ‘0’.
NOTE)
1. Where n = 0, 1 and 2.
Clear PWM Generator Counter
Clear the PWM generator counter (When write, automatically cleared “0” after
being cleared counter)
PWM generator enable (Counter clear and start)
NOTE)
1. This bit shouldn’t set to “1b” when EMGIFR = “1b”.