ACU-RITE MILLPWR G2 - MILLPWRG2 Access Code; Access Code; Access to Machine Parameter Operations

ACU-RITE MILLPWR
G2
11
MILLPWR
G2
Access Code
MILLPWR
G2
Access Code
Access code
Access to machine parameter operations
The access code must be entered before the installation setup
parameters can be accessed or changed.
 Press the SETUP key to enter the Job Setup dialogue.
 Press the Install Setup soft key, and enter the
access code.
Attention!
The parameter access code is 8891
Attention!
To prevent setup parameters from being changed, remove
this page from the manual after initial system setup.
Retain this information in a safe place for future use.