ACU-RITE MILLPWR G2 - Program Functions; Program Functions Soft Keys

ACU-RITE MILLPWR
G2
83
5.1 Programming Introduction
Program functions
Program functions soft keys
The Program Functions soft key provides access to the following soft
keys for saving, clearing, or loading an existing program to either edit
or run.
Soft key Function
The Load soft key will load the selected program. If
a program is currently loaded, a prompt will be
displayed asking for confirmation to clear the loaded
program. If a program is currently loaded, it must be
saved prior to pressing this key.
The Save soft key will save the currently loaded
program, or the program can be saved under a new
program name.
The Program Type soft key opens a popup Menu
providing the choices which type of programs to
display in the folder listing; MILLPWR
G2
programs,
G-code programs, DXF drawings, All programs or All
files.
The Function soft key opens a popup Menu
providing the choices to Cut, Copy, Paste, Merge,
Rename, or Delete any program that is listed in the
folder. It does not need to be the currently loaded
program.
The Select soft key allows the operator to select
one or more programs from the current folder, or
select all the programs. Select the Clear option to
un-select the current selected program(s). This
allows features within the Function soft key to be
done on the selected group of programs.
The Change Window soft key toggles the cursor
between the folder list window (1), folder tree
window (2) (if displayed) and program list
window (3).
The Folder View soft key opens the folder tree
window to access all folders, and sub folders. Use
the Change Window soft key to navigate to the
available windows.
Press the Exit soft key to return to the Program
Function screen.