ACU-RITE MILLPWR G2 - Page 9

ACU-RITE MILLPWR
G2
9
Manual Information
751005-03-00
 Teach Position and Probe soft key are now always available together
(see page 56).
 Show Contour is now available in 3D line view in addition to
2D line view (see page 86).
 Forward or Reverse is now available for finish passes (see page
167).
751005-04-00
 The Service files section has been updated; see Chapter 10.1.
 Software update procedure has been updated; see Chapter 10.1.
 Shutdown / Restart procedure has changed (see page 26).
 VIEW hard key description has been updated; see Chapter 5.1.
 Aux step now allows user specified continuity; see page 205.
 The Contour step is now part of the Position/Milling soft key; see
page 161.