216 1100 Series FD Reference Manual
6 Identifying Parts and Materials
Accessory Kit
This kit contains some accessories and tools needed for the installation and
repair/calibration of the detector.
Tabl e 35 Accessory Kit Parts
Item Description Part Number
Accessory kit G1321-68705
includes
Corrugated tubing, 120 mm lg, re-order 5 m 5062-2463
1 Teflon Tubing flexible i.d. 0.8 mm (flow cell to waste),
re-order 5 m
5062-2462
2 Fitting male PEEK, Qty=2 0100-1516
3 Capillary column – detector 380 mm lg, 0.17 i.d.
includes items 4, 5 and 6 (not assembled)
G1315-87311
4 Ferrule front SST, qty=1 0100-0043
5 Ferrule back SST, qty=1 0100-0044
6 Fitting SST, qty=1 79814-22406
Screwdriver hexagonal 4 mm, 100 mm long 5965-0027
Screwdriver hexagonal 2.5 mm, 100 mm long 5965-0028
Needle-Syringe 9301-0407
Glass-Syringe 9301-1446
Calibration Sample, Glycogen 5063-6597
Sample filter, diameter=3 mm, pore size 0.45 µm, QYT=5 5061-3367 (pack of 100)
Hex key set 1 – 5 mm 8710-0641
Wrench open end 1/4 – 5/16 inch 8710-0510
ESD wrist strap 9300-1408
To Next Page
Loading...
