Agilent Technologies 1100 Series Reference Manual

316 1100 Series FD Reference Manual
9 Introduction to the Control Module
System - Control
Use the F1 key (Control) to select the FL-Detector. Here you receive
information about the not-ready conditions if needed. F2 key (Reset) does a
re-initialization of the FLD. Use the F8 key (On/Off) to turn on the lamp(s).
System - Configuration
Use the Esc key to receive Views on the F5 key. Choose System from the
pull-down menu. Use the F2 key (Configure) to select the FLD. Here you
define further special setpoints for the FLD operation.

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English