Verifying VLAN Rule Configuration Defining VLAN Rules
page 12-22 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Verifying VLAN Rule Configuration
To display information about VLAN rules configured on the switch, use the following show command;
For more information about the resulting display from this command, see the OmniSwitch CLI Reference
Guide. An example of the output for the show vlan rules command is also given in “Sample VLAN Rule
Configuration” on page 12-3.
show vlan rules Displays a list of rules for one or all VLANs configured on the switch.
To Next Page
Loading...
