Taking Clusters and Servers On/Off Line Configuring Server Load Balancing
page 34-30 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Taking a Server Off Line
You can administratively disable a server in an SLB cluster and take it off line with the ip slb server ip
cluster command by entering ip slb server, the IP address of the server you want to disable in dotted deci-
mal format, cluster, the name of the SLB cluster to which the server belongs, and admin status disable.
For example, to administratively disable a server with an IP address of 10.105.16.123 that belongs to an
SLB cluster called “Web_Server”, you would enter:
-> ip slb server ip 10.105.16.123 cluster Web_Server admin status disable
To Next Page
Loading...
