Alcatel-Lucent OmniSwitch 6800 Series - Relationship to Other Features

Configuring Dynamic Link Aggregation Dynamic Link Aggregation Overview
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page 17-9
Relationship to Other Features
Link aggregation groups are supported by other switch software features. For example, you can configure
802.1Q tagging on link aggregation groups in addition to configuring it on individual ports. The following
features have CLI commands or command parameters that support link aggregation:
• VLANs. For more information on VLANs, see Chapter 4, “Configuring VLANs.”
• 802.1Q. For more information on configuring and monitoring 802.1Q, see Chapter 15, “Configuring
802.1Q.”
• Spanning Tree. For more information on Spanning Tree, see Chapter 7, “Configuring Spanning Tree
Parameters.”
Note. See “Application Examples” on page 17-29 for tutorials on using link aggregation with other
features.