Alcatel-Lucent OmniSwitch 6800 Series - Ipmsv6 Default Values

Configuring IP Multicast Switching IPMSv6 Default Values
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page 32-5
IPMSv6 Default Values
The table below lists default values for Alcatel-Lucent’s IPMSv6 software.
Parameter Description Command Default Value/Comments
Administrative Status ipv6 multicast status disabled
MLD Querier Forwarding ipv6 multicast querier-
forwarding
disabled
MLD Version ipv6 multicast version version 1
MLD Query Interval ipv6 multicast query-interval 125 seconds
MLD Last Member Query Interval ipv6 multicast last-member-
query-interval
1000 milliseconds
MLD Query Response Interval ipv6 multicast query-response-
interval
10000 milliseconds
MLD Router Timeout ipv6 multicast router-timeout 90 seconds
Source Timeout ipv6 multicast source-timeout 30 seconds
MLD Querying ipv6 multicast querying disabled
MLD Robustness ipv6 multicast robustness 2
MLD Spoofing ipv6 multicast spoofing disabled
MLD Zapping ipv6 multicast zapping disabled