Alcatel-Lucent OmniSwitch 6800 Series - Valid Port Settings on Omniswitch 9000 Series Switches

Ethernet Ports Overview Configuring Ethernet Ports
page 37-6 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
See the OmniSwitch 6850 Series Hardware Users Guide for more information about the OmniSwitch 6850
hardware that is supported in the current release.
Valid Port Settings on OmniSwitch 9000 Series Switches
The table below lists valid speed, duplex, and autonegotiation settings for the different OmniSwitch 9000
port types.
Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet switching modules can be used as backbone links,
with Gigabit Ethernet and 10 Gigabit Ethernet modules offering additional support for high-speed servers.
All modules support 802.1Q hardware tagging for enhanced compatibility. And all Gigabit and 10 Gigabit
modules support jumbo frame configuration.
OmniSwitch 6850-48
(ports 49–50)
Fiber XFP 10000 full No
OmniSwitch 6850-
U24X
(ports 1–22)
Fiber SFP 1000 full No
OmniSwitch 6850-
U24X
(ports 23–24)
Combo copper RJ-45/
Fiber SFP
RJ-45: auto/10/
100/1000
SFP: 1000
RJ-45: auto/
full/half
SFP: full
RJ-45: Yes/
SFP: No
OmniSwitch 6850-
U24X
(ports 25–26)
Fiber XFP 10000 full No
NI Module Port Number/Type User-Specified
Port Speed
(Mbps)
Supported
User-Specified
Duplex
Supported
Auto
Negotiation
Supported?
OS9-GNI-C24 24 Copper twisted pair (RJ-45) auto/10/100/
1000
auto/full/half Yes
OS9-GNI-U24 Up to 24 high-density LC ports 1000 full No
OS9-GNI-
C20L
(ports 1–20)
20 Copper twisted pair (RJ-45) auto/10/100/
1000
auto/full/half Yes
OS9-GNI-
C20L
(ports 21–22)
Up to 2 high-density LC ports 1000 full No
OS9-GNI-
C48T
48 Mini RJ-21 ports auto/10/100/
1000
auto/full/half Yes
OS9-XNI-U2 2 fiber XFP 10000 full No
OS9-XNI-U6 6 fiber XFP 10000 full No
Chassis Type
(Port Nos.)
Port Type User-Specified
Port Speed
(Mbps)
Supported
User-Specified
Duplex
Supported
Auto
Negotiation
Supported?