Quick Steps for Importing ACL Text Files Using ACL Manager
page 28-4 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Quick Steps for Importing ACL Text Files
The following steps provide a quick tutorial for importing text files that contain common industry syntax
used to create ACLs:
1 Activate the ACLMAN shell using the aclman CLI command.
-> aclman
Welcome to ACLMAN
Aclman#
When the shell goes operational, the Privileged Exec Mode is automatically activated.
2 Use the import command to import supported ACLMAN syntax from a specified text file into the
running configuration. For example:
Aclman#import acl_file_1
3 Optional. Use the show running-config command to display the ACL configuration. The display is
similar to the following:
Aclman#show running-config
access-list 10 permit any
access-list 10 deny 20.0.0.0 0.255.255.255
access-list 22 permit any
access-list 23 permit 2.1.1.2
ip access-list standard Test1
permit 198.172.1.4
permit 198.172.1.5
ip access-list standard Test2
permit 30.0.0.0
permit 20.0.0.0
4 Save the ACLMAN running configuration using the write memory command. Note that if this is not
done, the ACL configuration is lost on the next reboot of the switch.
Aclman#write memory
To Next Page
Loading...
