Switch Logging Specifications Using Switch Logging
page 36-2 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Switch Logging Specifications
Functionality Supported High-level event logging mechanism that for-
wards requests from applications to enabled
logging devices.
Functionality Not Supported Not intended for debugging individual hardware
applications.
Logging Devices Flash Memory/Console/IP Address
Application ID Levels Supported IDLE (255), DIAG (0), IPC-DIAG (1),
QDRIVER (2), QDISPATCHER (3), IPC-LINK
(4), NI-SUPERVISION (5), INTERFACE (6),
802.1Q (7), VLAN (8), GM (9), BRIDGE (10),
STP (11), LINKAGG (12), QOS (13), RSVP
(14), IP (15), IPMS (17), AMAP (18), GMAP
(19), SLB(25), AAA (20), IPC-MON (21), IP-
HELPER (22), PMM (23), MODULE (24),
EIPC (26), CHASSIS (64), PORT-MGR (65),
CONFIG (66), CLI (67), SNMP (68), WEB
(69), MIPGW (70), SESSION (71), TRAP (72),
POLICY (73), DRC (74), SYSTEM (75),
HEALTH (76), NAN-DRIVER (78), RMON
(79), TELENET (80), PSM (81), FTP (82),
SNMI (83), DISTRIB (84), EPIL0GUE (85),
LDAP (86), NOSNMP (87), SSL (88),
DBGGW (89), LANPOWER (108)
Severity Levels/Types Supported 2 (Alarm - highest severity), 3 (Error),
4 (Alert), 5 (Warning) 6 (Info - default),
7 (Debug 1), 8 (Debug 2), 9 (Debug 3 - lowest
severity)
To Next Page
Loading...
