Alcatel-Lucent OmniSwitch 6800 Series - Configuring Functional Privileges on the Server

RADIUS Servers Managing Authentication Servers
page 25-12 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Configuring Functional Privileges on the Server
Configuring the functional privileges attributes (Alcatel-Lucent-Acce-Priv-F-x) can be cumbersome
because it requires using read and write bitmasks for command families on the switch.
1 To display the functional bitmasks of the desired command families, use the show aaa priv hexa
command.
2 On the RADIUS server, configure the functional privilege attributes with the bitmask values.
Note. For more information about configuring users on the switch, see the “Switch Security” chapter in
the OmniSwitch 6800/6850/9000 Switch Management Guide.