Dynamic Link Aggregation Specifications Configuring Dynamic Link Aggregation
page 17-2 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Dynamic Link Aggregation Specifications
The table below lists specifications for dynamic aggregation groups and ports:
IEEE Specifications Supported 802.3ad — Aggregation of Multiple Link Segments
Maximum number of link aggregation groups 32 (per standalone switch or a stack of switches)
Range for optional group name 1 to 255 characters
Number of links per group supported 2, 4, or 8
Group actor admin key 0 to 65535
Group actor system priority 0 to 65535
Group partner system priority 0 to 65535
Group partner admin key 0 to 65535
Port actor admin key 0 to 65535
Port actor system priority 0 to 255
Port partner admin key 0 to 65535
Port partner admin system priority 0 to 255
Port actor port 0 to 65535
Port actor port priority 0 to 255
Port partner admin port 0 to 65535
Port partner admin port priority 0 to 255
CLI Command Prefix Recognition All dynamic link aggregation configuration com-
mands support prefix recognition. See the “Using the
CLI” chapter in the OmniSwitch 6800/6850/9000
Switch Management Guide for more information.
To Next Page
Loading...
